Prince LSR Rapid Extend Logsplitter Valve

Get directions

Frequently Asked Questions

Log Splitter Parts

Prince LSR Rapid Extend Logsplitter Valve

High speed performance with a 3 - 4 GPM pump!

Special Regen Position for blazing fast extend stroke
Requires only 3 - 4 gal. reservoir
Can use small tractor hydraulic system
Relief valve adjustable up to 3500 PSI
Handle can be installed "up" or "down"
Pressure-released detent on retract

HOW THE LSR VALVE WORKS:
Just press the handle all the way in for high speed "Rapid-Extend" performance. The cylinder will split many logs in the fast mode, but if it can't, just pull the handle back a little and get the full power of your cylinder to break the split open (about 4 times the force of the high speed mode). This motion will become "natural" after just a few splits. Then shift into the detented retract position and reach for the next log. NOT FOR USE WITH 2-STAGE PUMPS

PART NO.

PRINCE#

DESCRIPTION

PSI

MAX GPM

WT.

20-3060

LSR-3060-3

3/4" work posts, 1/2" in & out

3500

4 in, 25 out

12

TYPICAL PERFORMANCE with a 3 GPM pump, and a 4" bore cylinder with a 2" rod:

Rapid-Extend speed: 3.7" per sec. (24" in 6.5 sec!)

Full bore speed: .92" per sec.

Rapid-Extend force: 7,850 lbs @2,500 PSI

Full bore force: 31,400 lbs

Retract speed: 1.22" per sec.

Logsplitter Parts

Item No.	Description	Amount		Qty.
20-3060	Prince LSR Rapid Extend Logsplitter Valve	$90.35

�2010 CYLINDER SERVICES

Prices on this website good Winter '10, may change without notice.

Cylinder Services is committed to responsible information handling and will respect your privacy.
We will not sell your email address or other contact information. You may opt-out of electronic
communication with us at any time.
Terms & Conditions