Metaris Dump Truck Pumps - Cylinder Services

Get directions

Frequently Asked Questions

Pumps: Dump Truck Pumps

Metaris Dump Truck Pumps
REMOTE OR DIRECT MOUNT 6-WHEEL, 10-WHEEL TRUCKS

Up to 48 GPM, 2500 PSI, built-in relief valve, 2 or 3 line operation. Available with twin shafts for remote drive, or splined shaft for direct mount to PTO.
Heavy duty cast iron pumps with solid bronze thrust plates, dual roller bearings on each shaft, integral hardened gear/shaft units. Interchangeable with other popular dump pumps. MG series is for 6-wheel trucks.

D15, C350 Air Shift Cylinders. Converts pump valve to pneumatic control. Cast aluminum. Easy installation.
Air control valves & kits also available

MODEL	MOUNT	SHAFT(S)	DISPLACEMENT	MAX PSI	MAX RPM	MAX GPM	NPT PORTS	WT.
MH101	REMOTE	1" (Dual)	6.4 Cu In/ Rev	2500	1800	48	1 1/4" X 1"	72
MH102*	PTO	7/8" Spline	6.4 Cu In/ Rev	2500	1800	48	1 1/4" X 1"	72
MG101	REMOTE	1" (Dual)	3.9 Cu In/ Rev	2500	1800	29	1 1/4" X 3/4"	72
MG102*	PTO	7/8" Spline	3.9 Cu In/ Rev	2500	1800	29	1 1/4" X 3/4"	72
D15-3016	AIR SHIFT CYLINDER (fits MH101, 102)			200			1/8"	2.4
C3508DM	AIR SHIFT CYLINDER (fits MG101, 102)			200			1/8"	2.0
E1042	BRACKET - fits MH101

* Specify rotation for PTO mount pumps (standard is CCW facing pump shaft)

Item No.	Description	Amount	Qty.
MH101	Metaris Twin Shaft 10-Wheel Dump Pump	$399.00
MH102	Direct-Mount 10-Wheel Dump Pump	$399.00
MG101	Metaris Twin Shaft 6-Wheel Dump Pump	$389.00
MG102	Direct-Mount 6-Wheel Dump Pump	$389.00
D15-3016	Air Shift Cyl for MH101, MH102	$88.25
C3508DM	Air Shift Cyl for MG101, MG102	$134.66
E1042	Bracket for MH101	$24.00

�2010 CYLINDER SERVICES

Prices on this website good Winter '10, may change without notice.

Cylinder Services is committed to responsible information handling and will respect your privacy.
We will not sell your email address or other contact information. You may opt-out of electronic
communication with us at any time.
Terms & Conditions